Field Controls 46275400 SWG-

Product Features : 

• Patented SWG or ComboVent Power Venters are ETL and cETL listed for all LP gas, natural gas, or oil-fired heating equipment. 
• The SWG or ComboVent combines the motor, blower, and vent hood in one complete, easy to install unit. The SWG mounts on the outside of the building and pulls the combustion gases from the appliance through the outside wall utilizing 100% negative pressure.
• Benefits of the SWG or ComboVent Power Venter include:
• 100% negative pressure in the vent pipe for maximum safety.
• Standard galvanized pipe can be used instead of expensive stainless steel.
• No need to seal vent pipe joints, saving time and money.
• Significantly longer vent lengths than positive pressure, direct vent systems.
• The SWG or ComboVent is recommended by major heating appliance manufacturers.
• The SWG or ComboVent must be sized to match the appliance or appliances' input firing rate. Most firing rates are published in the manufacturer's installation manual.
• The SWG and ComboVent must be installed with a CK Control Kit to ensure proper listing and safe, efficient venting.
• Control kit required for operation
• Use with gas or oil furnaces, boilers, and water heaters
• When co-venting with water heater or additional appliance, can be used as a gas/oil combo single unit
• Avoid relining a chimne

Specifications : 

• Product Type : Power Venter
• Accessory type : Boiler/Furnace
• Height (Inch) : 9 
• Width (Inch) : 9 
• Heating Product Type: Accessory 
• Depth (Inch) : 23.25
• Width (Inch) : 9
• Heating Technology Type : Radiant
• BTU Input : 170000
• Voltage : 115v
• Hertz : 60
• RPM : 3000