Beckett 51621U Start Helper Nozzle Line Heater

Beckett 51621U Start Helper Nozzle Line Heater A solid-state, self-regulating heating element inside the Start Helper maintains the temperature of oil in the nozzle line. As the temperature of the oil drops, the heat output from the Start Helper increases to maintain a constant temperature.The Start Helper is continuously powered, assuring that the burner will start with a warm nozzle at all times. The burner with Start Helper will ignite and run with a more consistent atomization pattern until shutoff.The Beckett START HELPER simply clamps around the nozzle line and is continuously energized to provide the help needed at the beginning of the start cycle by maintaining the oil temperatures at 130º - 140ºF during standby. It also provides some additional heating during the operating cycle. (8-12 watt rating) . Inside the START HELPER is a solid-state, self-regulating heating element that maintains the temperature in the nozzle line. As the oil temperature drops, the heat output from the element increases to compensate. This product is also referred to as a Nozzle Line Pre-Heater.

• (3) Ty-wrap
• (1) Clamp
• (2) Screw 8-32 NC x 2 PN HD MCHN
• (1) Start Helper
• (1) Shrink Tubing 2" (For AFII Burner Only)